English
Русский
Português
العربية
Español
Français
English
Automatic Cable Tray Roll Forming Machine
Description
Automatic Cable Tray Roll Forming Machine is for producing the cable tray. It can uncoil, level, punch and continuously roll forming with automatic cutting to length. The width of the cable tray can be adjusted. It is the essential equipment in the steel structure industry.
The machine can be customized based on the customer’s specific technical requirements.
Automatic Cable Tray Roll Forming Machine can produce the profile with following different size, with servo feeding device and punching bed.. Special sizes of the profile can be designed in our company.
Work flow
Decoiling → Leveling → Punching → Cutting → Roll Forming → Plate to Support Table
Stable Servo Feeder
Function: feed coil feet to punching press step by step
Feeding roller material: 9Gr2Mo(or GGr15), hardness HRC 55-60.
Feeding length can be set by operator, and several groups of length data can be input into the controller. Feeding precision is ±
High Efficiency Punching device
1. It adopts open type mechanical punching bed with good rigidity.
2. With manual button and foot switch, very easy for operation.
3. Punch Mould Material: Cr12Mov (HRC62-63)
Cutter Material: Cr12MoV (HRC60 – 62)
High Precision Roll Forming Unit
1. Stable Machine Working with Gear Box Transmission
2. One side of the rollers are movable to adjust the cable tray width.
3. The frame base adopts welding structure with good rigidity.
4. The roller adopts Cr12 with quenching treatment.
In order to satisfy various customer requirements, we design and manufacture Automatic Cable Tray Roll Forming Machine in different specifications, models and configurations.
Packaging Details
1. Three *40GP containers for loading one set of the product line.
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3. Spare parts and some small parts packed in wooden box;
4. All Components Fixed by steel wire with Container. Suitable for long time sea shipping.