English
Русский
Português
العربية
Español
Français
English
PVC Pipe Welding Machine
Description
PVC Pipe Welding Machine is for producing the pvc pipe. Simply, it’s a pipe welding line plus a plastic composited machine. The composition of equipment is from uncoiler to fixed length cutting saw. Rolling speed can be adjusted correspondingly within suitable range of pipe diameter and wall thickness.
The machine can be customized based on the customer’s specific technical requirements.
PVC Pipe Welding Machine can produce the pipe according to customer’s requirements, the parameters listed is only for your reference. Special sizes of the profile can be designed in our company.
Work flow
Uncoiler→Shearing and butt-welder→ Horizontal-type Loop→Forming, welding, sizing machine→Plastic composited machine→Computer cutting saw→Run-out table
Horizontal type loop
The steel strips which is stored in it shall be enough to ensure main machine to run continuously while welding strips from two coils.
When change the coil, it doesn’t need to stop machinery to improve the work efficiency.
1) Horizontal roll stand
The structure adopts cast steel, double housing, changing rolls in the side. It is easy for changing the rolls and stable structure.
2) Vertical roll stand
It is passive rotation, it is used to assist the forming roll to improve the forming quality.
3) Drive gear box
It adopts spiral bevel gear and cylindrical gear with high precision.
Welding Unit
1) One set of guide roll stand for controlling direction of pipe seam to insure pipe seam flatly and straightly entering into extruding rollers.
2) One set of extruding roll stand for controlling weld seam and realizing successful welding
3) Two sets of scraper frame for scraping outside weld seam to keep it smoothly and flatness.
Sizing Unit
It is mainly fine shaping pipe after welding and controlling size accuracy.
Packaging Details
1. Five *40GP containers for loading one set of the product line. (based on the machine specification.)
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3. Spare parts and some small parts packed in wooden box;
4. All Components Fixed by steel wire with Container. Suitable for long time sea shipping.
